diff --git a/board/theobroma-systems/lion_rk3368/Kconfig b/board/theobroma-systems/lion_rk3368/Kconfig
new file mode 100644
index 0000000..d7aa487
--- /dev/null
+++ b/board/theobroma-systems/lion_rk3368/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_LION_RK3368
+
+config SYS_BOARD
+	default "lion_rk3368"
+
+config SYS_VENDOR
+	default "theobroma-systems"
+
+config SYS_CONFIG_NAME
+	default "lion_rk3368"
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+	def_bool y
+
+endif
diff --git a/board/theobroma-systems/lion_rk3368/MAINTAINERS b/board/theobroma-systems/lion_rk3368/MAINTAINERS
new file mode 100644
index 0000000..857f784d
--- /dev/null
+++ b/board/theobroma-systems/lion_rk3368/MAINTAINERS
@@ -0,0 +1,10 @@
+LION-RK3368 (RK3368-uQ7 system-on-module)
+M:	Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
+M:	Klaus Goger <klaus.goger@theobroma-systems.com>
+S:	Maintained
+F:	board/theobroma-systems/lion_rk3368
+F:	include/configs/lion_rk3368.h
+F:	arch/arm/dts/rk3368-lion.dts
+F:	configs/lion-rk3368_defconfig
+W:	https://www.theobroma-systems.com/rk3368-uq7/tech-specs
+T:	git git://git.theobroma-systems.com/lion-u-boot.git
diff --git a/board/theobroma-systems/lion_rk3368/Makefile b/board/theobroma-systems/lion_rk3368/Makefile
new file mode 100644
index 0000000..f13a20b
--- /dev/null
+++ b/board/theobroma-systems/lion_rk3368/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y += lion_rk3368.o
diff --git a/board/theobroma-systems/lion_rk3368/README b/board/theobroma-systems/lion_rk3368/README
new file mode 100644
index 0000000..47304fc
--- /dev/null
+++ b/board/theobroma-systems/lion_rk3368/README
@@ -0,0 +1,60 @@
+Here is the step-by-step to boot to U-Boot on RK3368-uQ7
+
+Get the Source and build ATF
+============================
+
+  > git clone git://git.theobroma-systems.com/arm-trusted-firmware.git
+  > cd arm-trusted-firmware
+  > make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3368 bl31
+  > cp build/rk3368/release/bl31.bin ../u-boot/bl31-rk3368.bin
+
+Configure U-Boot
+================
+
+  > cd ../u-boot
+  > make lion-rk3368_defconfig
+
+Build the TPL/SPL stage
+=======================
+
+  > make CROSS_COMPILE=aarch64-unknown-elf- ARCH=arm
+  > tools/mkimage -n rk3368 -T rksd -d tpl/u-boot-tpl.bin spl-3368.img
+  > cat spl/u-boot-spl-dtb.bin >> spl-3368.img
+
+Build the full U-Boot and a FIT image including the ATF
+=======================================================
+
+  > make CROSS_COMPILE=aarch64-unknown-elf- ARCH=arm u-boot.itb
+
+Write to a SD-card
+==================
+
+  > dd if=spl-3368.img of=/dev/sdb seek=64
+  > dd if=u-boot.itb of=/dev/sdb seek=512
+
+
+If everything went according to plan, you should see the following
+output on UART0:
+
+<debug_uart> U-Boot TPL board init
+Trying to boot from BOOTROM
+Returning to boot ROM...
+Trying to boot from MMC1
+NOTICE:  BL31: v1.3(release):v1.2-1320-gbf43a443
+NOTICE:  BL31: Built : 18:04:47, Jul  5 2017
+
+
+U-Boot 2017.07-00158-g2395e99858 (Jul 18 2017 - 21:03:31 +0200)
+
+Model: Theobroma Systems RK3368-uQ7 SoM
+DRAM:  2 GiB
+MMC:   dwmmc@ff0c0000: 1, dwmmc@ff0f0000: 0
+Using default environment
+
+In:    serial@ff180000
+Out:   serial@ff180000
+Err:   serial@ff180000
+Net:
+Warning: ethernet@ff290000 (eth0) using random MAC address - d2:69:35:7e:d0:1e
+eth0: ethernet@ff290000
+Hit any key to stop autoboot:  2
diff --git a/board/theobroma-systems/lion_rk3368/fit_spl_atf.its b/board/theobroma-systems/lion_rk3368/fit_spl_atf.its
new file mode 100644
index 0000000..e7d98b9
--- /dev/null
+++ b/board/theobroma-systems/lion_rk3368/fit_spl_atf.its
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2017 Theobroma Systems Design und Consulting GmbH
+ *
+ * Minimal dts for a SPL FIT image payload.
+ *
+ * SPDX-License-Identifier: GPL-2.0+  X11
+ */
+
+/dts-v1/;
+
+/ {
+	description = "FIT image with U-Boot proper, ATF bl31, DTB";
+	#address-cells = <1>;
+
+	images {
+		uboot {
+			description = "U-Boot (64-bit)";
+			data = /incbin/("../../../u-boot-nodtb.bin");
+			type = "standalone";
+			arch = "arm64";
+			compression = "none";
+			load = <0x00200000>;
+		};
+		atf {
+			description = "ARM Trusted Firmware";
+			data = /incbin/("../../../bl31-rk3368.bin");
+			type = "firmware";
+			arch = "arm64";
+			compression = "none";
+			load = <0x00010000>;
+			entry = <0x00010000>;
+		};
+
+		fdt {
+			description = "RK3368-uQ7 (Lion) flat device-tree";
+			data = /incbin/("../../../u-boot.dtb");
+			type = "flat_dt";
+			compression = "none";
+		};
+	};
+
+	configurations {
+		default = "conf";
+		conf {
+			description = "Theobroma Systems RK3368-uQ7 (Puma) SoM";
+			firmware = "uboot";
+			loadables = "atf";
+ 			fdt = "fdt";
+		};
+	};
+};
diff --git a/board/theobroma-systems/lion_rk3368/lion_rk3368.c b/board/theobroma-systems/lion_rk3368/lion_rk3368.c
new file mode 100644
index 0000000..73b1488
--- /dev/null
+++ b/board/theobroma-systems/lion_rk3368/lion_rk3368.c
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+#include <common.h>
+#include <dm.h>
+#include <ram.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/grf_rk3368.h>
+#include <asm/arch/timer.h>
+#include <syscon.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int mach_cpu_init(void)
+{
+	return 0;
+}
+
+int board_init(void)
+{
+	return 0;
+}